Fosroc Chemicals
Providing you the best range of Fosroc Construction Chemicals, Fosroc Admixtures, Fosroc Conbextra Ep 10, Fosroc Nitobond SBR, Conplast SP430 and Cebex 100 Chemical with effective & timely delivery

Backed by our prosperous industry acquaintance, we present Fosroc Conbextra GP2. This product is obtainable in varied patterns that meet on patron’s demand.

Other Details:
  • Cementitous Precision Grout
Nitoflor Hardtop Standard is quality controlled, factory blended powder which are ready to use on site. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface of fresh, wet concrete. Nitofl or Hardtop Standard cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin ‘granolithic’ screeds, viz., shrinkage, cracking, etc., are completely overcome. Being non-metallic, Nitoflor Hardtop Standard provide a non-slip surface which will never rust and disintegrate.
  • Non metallic - does not rust or stain.
  • Provides a hard, abrasion resistant surface
  • Forms monolithic bond with base concrete
  • Easy and economical to apply
Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
  • Can be pumped or poured into restricted locations.
  • Fluidity to allow for placement without vibration.
  • Pre-bagged to overcome site-batched variations.
  • Rapid strength gain to facilitate early reinstatement.
  • High ultimate strengths and low permeability of cured repair.
  • Contains no chloride admixture.
High performance viscosity modifying agent (VMA) for stable and homogeneous flowing concrete, mortars and grouts. Advantages  Eucoplacant 721 is particularly suitable for self compacting concrete applications. It gives excellent stability to hydraulic binder based materials. Eucoplacant 721 limits bleeding, segregation and sedimentation of concrete, mortars and grouts. In particular, it makes possible to manufacture concrete with high fluidity being able to be placed by gravity, without any means of vibration. The addition of VMA allows to obtain concrete with high quality surface finish, and also allows to remove some of the harmful effects related to the use of mechanical means of placing (noise etc.)
In line with clients' variegated requirements, we bring forth a distinguished collection of Fosroc Conbextra GP2. The offered chemical is processed using supreme class chemical compounds, procured from reliable sources of the industry keeping in mind industry standard at our vendor’s well-equipped production site. In order to deliver flawless primer to our clients, this chemical is tested on various predefined standards of the industry. Provided chemical is available in different packaging options at highly competitive prices. Features:
  • No metallic iron content to cause staining
  • Pre-packed material overcomes onsite batching variations
  • Develops high early strength without the use of chlorides
  • Free flow ensures high level of contact with load bearing area
Nitocote ET140 is based on solvent-free epoxy resins modified with coal tar pitch. It is supplied as a two pack materials in pre-weighed quantities ready for on-site mixing and use. Nitocote ET140 is applied as a two coat application.
  • High build, single coat application
  • Good chemical resistance.
  • Primerless.
  • Excellent hold-out on vertical surfaces.
  • Moderate flexibility.
Details -
  • Pot life - 2 hrs
  • Time between coats- 4 hrs
  • Full hardness- 24hrs
  • Full Cure- 7 days
  • Compressive Strength -40 N/mm2
We have gained a remarkable position in the market that is involved in offering Auramix Superplasticizer.
  • Increased retardation controls the heat of hydration and
  • yields high ultimate strength
  • Higher E modulus
  • Improved adhesion to reinforcing and prestressing steel
  • Better resistance to carbonation
  • Lower permeability
  • Better resistance to aggressive atmospheric conditions
  • Reduced shrinkage and creep
  • Increased durability
Being a foremost organization in the industry, we are actively engaged in offering the best quality range of Conplast NC Concrete Admixture. Other Details: Conplast NC chloride-free accelerating admixture is supplied as a light straw-coloured solution that instantly disperses in water.Conplast NC accelerates the early stages of cement hydration, producing more rapid stiffening and allowing strength gain to commence at an earlier stage. This effect is particularly noticeable at low temperatures and is most significant in the first 24 hours after mixing.Advantages:
  • Particularly effective in assisting to offset the delaying effect of low temperatures on setting and strength gain.
  • Accelerated setting gives added protection against early age frost attack.
  • Also provides a degree of water reduction or increased workability.
  • Suitable for use in bricklaying mortar.
  • Chloride-free, safe for use in reinforced concrete.
Our clients can avail from us a wide range of Cebex 112 Admixture Chemical. These admixtures are processed making use of quality assured chemical compounds in tune with the set market guidelines. Additionally, these are delivered by us in tamper-proof and highly moisture-proof packing solutions to our customers. Features:
  • Nonpungent odor
  • Balanced pH value
  • Safe to use
With desire to cement our reputation in the market, we are engaged in offering an excellent range of Forsoc Brushbond Waterproofing Membrane. The offered membrane is precisely processed using premium quality chemical compound and sophisticated technology in adherence with industry quality standards. In addition to this, the offered membrane is packed with high precision to ensure its purity for a longer period. Clients can avail this membrane in various specifications and can be available in various packaging options to fulfill the varied demands of our clients. Features:
  • Minimum surface preparation needed - Low labour costs
  • Applied directly to the damp concrete and masonry
  • Excellent adhesion - Bonds to porous and nonporous surfaces
  • Non-toxic-ideal for potable water tank
Conplast WP90 powder is a fine, white powder ready for use with concrete or cement mortar mixes. Conplast WP90 powder is a traditional admixture to fill natural pores within the concrete or mortar matrix to reduce porosity and improve water tightness. Advantages:
  • Easy to use- Simple application familiar to site operations
  • High Quality - Traditional waterproofing material manufactured to latest standards.
  • Workability - Improves workability
Conplast SD110 is a brown liquid which has been formulated for optimum performance as a cement saver under manufacturing conditions encountered in Concrete blocks. Advantages:
  • Cement saving - strength, density and yield maintained with less cement
  • Increased strengths - higher strength without additional cement.
  • Reduction in breakages - reduced breakages through increased 'green strength.
  • Improved production - production cycle time can be reduced allowing more blocks to be produced in a given period.
By keeping track with the latest market developments, we are involved in providing a wide gamut of Conplast Admixture P211(Concrete Admixture). This range is sourced from the authentic vendors of the market, who make use of superior grade raw material in its processing procedures. Owing to high strength, unmatched quality and elevated durability, these admixtures are extensively used to enhance the effectiveness of water content of a concrete mix. In addition, we also provide application support of this gamut to our clients as per their specific requirements. Specifications: Appearance : Brown liquid Specific gravity : 1.150 - 1.170 @250C Chloride content : Nil to IS:456 Air entrainment : Typically less than 1.5%. Additional air is entrained at normal dosages. Alkali content : Typically less than 5.0g Na2O equivalent / litre of admixture. Available In: Conplast Admixture P211 Conplast Admixture SP430 Conplast Admixture RP264 Conplast Admixture NC Rheomac 707
Conplast SP430 is a chloride free, super plasticizing admixture based on selected sulphonated naphthalene polymers. It is supplied as a brown solution which instantly disperses in water. Uses: To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix. Particularly suitable for precast concrete and other high early strength requirements.
Keeping the diverse requirements of customers in mind, we are instrumental in providing Fosroc Conbextra EP 10. Uses
  • Provides a free flowing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including :
  • Underplate grouting to substantial structural elements.
  • Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery.
  • Heavy industrial applications in steelworks, refineries chemical plants and electroplating works.
  • Structural infill where very high strength is required.
  • Rail track applications, to support heavy cranes, or on transporter rails.
Nitobond SBR is modified styrene butadiene rubber emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. Advantages:
  • Simple to use - Single component, gauged as required
  • High adhesion - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc
  • Versatile - Compatible with all common hydraulic cements
  • Cost effective - Nitobond SBR is economical to use
Auramix 350 is a unique combination of new generation super plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water. Auramix 350 disperses the cement particles effectively in the concrete mix and hence exposes a larger surface area to the hydration process. This effect is used either to increase the strength or to produce high workability concrete or reduce cement content of concrete or to retard the setting time of concrete.
Over the years, we have been able to establish ourselves as a prominent figure in this industry for trading, distributing and supplying premium grade Nitocote ET175. The offered compound is formulated at our vendor’s end with the combination of supreme grade active ingredients with the help of advanced processing techniques in adherence to set industry norms. Clients can avail this compound from us at pocket friendly price. Features:
  • Easy to use
  • Accurate composition
  • Prevent absorption of water
Auramix 400 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability.
  • Low viscosity suitable for pumping of different grades of
  • concrete to higher floors
  • Higher E modulus
  • Improved adhesion to reinforcing and prestressing steel
  • Better resistance to carbonation
  • Lower permeability
  • Better resistance to aggressive atmospheric conditions
  • Reduced shrinkage and creep
  • Increased durability
Brushbond is a cementitious coating for application to concrete and brickwork to provide a waterproof barrier and fiil out surface imperfections.Suitable for sealing water tanks,reserviors,toilets and bathrooms,balconies and basements as well as filling blowholes,cracks,imperfections and for providing concrete surfaces with a uniform appearance. Advantages:
  • Minimum surface preparation needed
  • Excellent adhension.Bonds directly to porous and non- porous surfaces
  • Waterproof and non-toxic-Ideal for potable water tanks
  • Excellent for damp-proofing basements below ground
  • Breathable-Allows transmission of water vapour from interior of building
  • High resistance to carbon dioxide and chloride ion diffusion
  • Can fill the honeycomds, dot surfaces and concrete with potholes
Hydroproof Xtra is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane Advantages:
  • Non - toxic, non-fl ammable and user friendly
  • Provides a tough, impermeable waterproof membrane
  • Can be applied by brush, on horizontal and vertical surfaces
  • Excellent adhesion to concrete and masonry surfaces
  • Packaging Size: 0.5, 1, 5 & 20 L packs
Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying. When first applied to a fresh cementitious surface the emulsion breaks to form a continuous, non-penetrating white coating. This dries to form a continuous clear film which provides a barrier to moisture loss, ensuring more efficient cement hydration, improved durability and reduced shrinkage.
  • Improved curing of concrete enhances cement hydration and provides a more durable concrete
  • Control of moisture loss improves surface quality, reducing permeability, producing a hard wearing, dust-free surface and minimising potential for surface cracking and shrinkage
  • Fugitive colour provides visual guide during application
  • Water based, therefore, non-flammable
  • Spray application reduces labour costs and eliminates the need for alternative curing systems
Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying. When first applied to a fresh cementitious surface the emulsion breaks to form a continuous, non-penetrating white coating. This dries to form a continuous clear film which provides a barrier to moisture loss, ensuring more efficient cement hydration, improved durability and reduced shrinkage.
Product Details:
Application Indutrial Use
Packaging Size 200 ltr.
Packaging Type Drum
Cebex 100, a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium. Advantages:
  • Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout
  • Reduced water/cement ratio mixes in the grout mix ensures low permeability and long term durability in service
  • Gives grout high fl uidity with low water/cement ratio, thus making placement or injection of the grout easy
  • MOQ:100Per 225g
Details -
  • Colour-white
  • Physical or chemical change- curing by loss of water
  • Application temp.-5-40 deg C
  • Cure rate- 3-5  days  depending  on thickness,  ambient temperature  and  humidity
Lokfix is a two-component polyester resin anchoring grout, meeting the requirements of BS EN 1504-6: Anchoring of reinforced steel bars. Supplied in pre-measured quantities, the material cures quickly to give consistent, high performance anchorages. The two versions of Lokfix available are : Lokfix S25 : Pourable grade, 25 minute gel time at 20°C for use in vertical down holes where the hole is 8 to 40 mm greater in diameter than the bar. Lokfix P25 : Thixotropic grade, 25 minute gel at 20°C for use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. The thixotropic nature of Lokfix P25 reduces flow of grout out of the hole.
Nitobond AR is a modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external application.
  • Single component gauged as required.
  • Simply brushed onto concrete as a primer.
  • Provides excellent bond to concrete, masonry, stonework, plaster and block-board.
  • Improves tensile and compressive properties. Allows thin section applications.
  • Compatible with all common hydraulic cements.
  • Suitable for use in Middle East conditions. Used as a curing membrane.
  • Is economical in use.
Nitomortar S is a high strength epoxy mortar, based on a high quality solvent-free epoxy resin system. The special silica aggregates provide high strength and excellent abrasion resistance. Nitomortar S is a three-component material supplied in pre-weighed quantities ready for on-site mixing and use.
  • High ultimate strength — suitable for structural use
  • Early development of strength minimises disruption
  • Abrasion-resistance — suitable for heavily trafficked areas
  • Highly resistant to a wide range of chemicals
  • Cured product is highly impermeable to water when ‘tight trowel’ finished
  • Typically twice as strong as good quality concrete
  • Pre-weighed components ensure consistency
Product Details:
Features Water Resistant
Grade Standard Industrial Grade, Chemical Grade
Shelf Life: 6 months
Yes! I am intereste
Spray applied membrane to retain moisture in concrete for effective curing. Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and bridgeworks.
  • Improved curing of concrete enhances cement hydration and provides a more durable concrete
  • Control of moisture loss improves surface quality, reducing permeability, producing a hard wearing, dust free surface and minimising potential for surface cracking and shrinkage
  • Light reflective grades minimise solar temperature gain
  • Spray application reduces labour costs and eliminates the need for alternative curing systems
Nitocote EP405 is based on solvent-free epoxy resins modified with coal tar pitch. It is supplied as a two pack materials in pre-weighed quantities ready for on-site mixing and use. Nitocote EP405 is applied as a two coat application.
  • High build, single coat application
  • Good chemical resistance.
  • Primerless.
  • Excellent hold-out on vertical surfaces.
  • Moderate flexibility.
We are renowned supplier of Concrete Admixture Conplast WL in Delhi/NCR. Description:
  • Water reducing / plasticizing admixture, conforms to IS: 9103- 1999 and also complies with IS ASTM C494 Type A.
Principal Use:
  • Improve the effectiveness of the water content concrete mix, allowing increased strengths and enhanced durability at optimal cement contents.
We are famous in this domain for offering an extensive array of Fosroc Cebex 200 Concrete Admixture to our esteemed clients. This admixture gives high grout fluidity with low water or cement ratio which making placement or injection of the grout easy. Also, these are no metallic iron content to corrode. Moreover, the offered assortment of products is available in a safe packaging. Features:
  • High bonding strength
  • Quick results
  • Long shelf life
  • Accurate composition
Colpor 200 is resistant to jet blast and is suitable for concrete runways and hard-standings and areas where fuel spillage is likely.
  • High movement accommodation
  • Cold applied — no heating equipment required
  • Fuel, oil and hydraulic fluid resistance
  • Jet blast resistant
Specifications -
  • Form-Two part compoundBase compound: viscous liquid
  • Curing agent: liquid
  • Colour- black
  • Setting time -After 10 to 16 hours @ 35°C Colpor 200 will be tack free and can accept traffic
To meet the diversified requirements of our prestigious clients, we are devotedly involved in Providing a broad gamut of Surface Treatment Chemicals. Our offered array comprising Concure WB, Concure LP90, Reebol and Reebaklens RR is procured from the most reliable vendors of the market. These products are widely used to improve effectiveness, durability and strength of the numerous surfaces. Apart from this, we are offering application support of these surface treatments to meet clients’ diverse requirements.
Nitocote SN522 is supplied as a colour less, ready to use, silicone resin solution which can be sprayed or brush applied onto the surface. Advantages
  • Ready to use: Brush or spray applied direct from container
  • Versatile: Equally effective on old or new surfaces.n
  • Protects brickwork: Risk of efflorescence is reduced.
Reebaklens is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution. Advantages
  • Safe with metals (except zinc and galvanized steel), wood, glass, plastic and rubber.
  • No corrosive action.
  • Penetrates oil and grease
onbextra EP75 is a solvent free epoxy resin grout designed for grouting of gap widths of 10 to 75 mm. It is supplied as a three component system consisting of base, hardener and specially graded aggregate. The components are supplied in the correct mix proportions designed for whole pack mixing on site.
  • Creep resistant -to Improve resistance to deformation under constant loading.
  • Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
  • Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
  • User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved.
We have gathered huge recognizance by providing highly demanded Fosroc Conbextra EP120LE Epoxy Grout. We take pride in presenting the highly reliable and durable free flowing epoxy resin grout that is widely utilized in heavy dynamic or mobile loads. Suitable for a gap range of 10mm - 120mm, the offered product can even performance exceptionally well in areas where high ambient temperatures are encountered. Features:
  • Fast and convenient installation
  • High compressive strength
  • Low temperature rise
  • Impervious to oil and chemicals